Torque motor is basically an induction motor; but with drooping curves. It specifies Stall (Lock) torque and no load speed on the name plate. A standard squirrel cage motor tries to maintain the speed as it is loaded while a Torque motor will drop in speed as it is loaded.

	HDPE Tapes, Monofilament- yarns, Box strapping
	All types of extruded plastic films
	Rubberised Fabrics, textiles 20 to 100Hz, 50 to 250 V, flange mounting type.
	Copper Wires from 8 SWG to 43 SWG.
	S.S. Wires/ M.S. Wires
	Strips of Copper, Mild Steel etc.
	‘MARK’ make TORQUE MOTORS are used in WIRE INDUSTRY for
	Wire Enamelling Machines from 14 SWG to 42 SWG (Both Horizontal & Vertical Type) Wire Stranding & Bunching Machines Wire Drawing Spooling Machines Paper Covered Conductors (Round & Strip) etc
	For Wire Drawing Spooling, Bunching, Stranding Machines
	3 HP, 1.5 Kg-M, 1400 RPM, 132 Frame, 3 Phase, SPFV with Blower 5 HP, 2.5 Kg-M, 1400 RPM, 132 Frame, 3 Phase, SPFV with Blower 7.5 HP, 3.5 Kg-M, 1400 RPM, 160 Frame, 3 Phase, SPFV with Blower 10 HP, 5.0 Kg-M, 1400 RPM, 160 Frame, 3 Phase, SPFV with Blower 15 HP, 7.5 Kg-M, 1400 RPM, 180 Frame, 3 Phase, SPFV with Blower 20 HP, 10 Kg-M, 1400 RPM, 180 Frame, 3 Phase SPFV with Blower

Available in IEC frame sizes as well as modified mechanical frames for special applications. 'MARK ELEKTRIKS' can also supply one to one replacement to imported motors.
Geared Torque Motors with planetory gearboxes are also available.

For ganged application such as HDPE Tapes/ Monofilament Yarns etc. one common variac can control all the Torque Motors. This is possible because we manufacture Torque Motors for such applications within a close tolerance with similar T/ N Curves.